Steels for keys refer to cold-drawn carbon steel bars with precise tolerances, primarily employed in the fabrication of machine wedges. Wedge steels are supplied in a normalized state, boasting a tensile strength ranging from 500 to 700 N/mm². Optionally, these steels can undergo conventional heat treatment if required.
Steels for keys are supplied in a rectangular cross-section and are readily available in standard dimensions according to the table:
Diameter | Weight (kg/m1) | Diameter | Weight (kg/m1) | Diameter | Weight (kg/m1) |
4×4 mm | 0.140 | 12×10 mm | 0.940 | 22×14 mm | 2.400 |
5×5 mm | 0.180 | 14×9 mm | 0.980 | 28×16 mm | 3.490 |
6×6 mm | 0.280 | 16×10 mm | 1.250 | 32×18 mm | 4.480 |
8×7 mm | 0.420 | 18×11 mm | 1.540 | 36×20 mm | 5.620 |
10×8 mm | 0.620 | 20×12 mm | 1.870 | 45×25 mm | 8.830 |
12×8 mm | 0.750 |
Upon customer request, non-standard dimensions can be supplied. For more information, please contact our sales department.
Čelici za klinove se isporučuju prema standardu DIN6885, a u kvalitetu prema tabeli:
Čelici za klinove:
W.Nr. | EN | JUS |
1.0503 | C45 | Č.1531 |
If you're uncertain about which quality is best suited for your project, feel free to reach out to our sales department. We'll provide tailored recommendations from our in-stock options or explore a comprehensive range of possibilities offered by our partners abroad.
The standard length of steel for wedges is 3000 mm.
However, our workshop is equipped with four modern saws capable of cutting these bars into blanks, significantly speeding up your production process.
If you need a length shorter than 3000 mm, no problem. Tool steel bars can be delivered in lengths below standard. The rounding unit for this product is 1000 mm.
At our facility, we offer the convenience of delivery directly to your address. For more information on arranging transportation, please reach out to our sales department.