Cladding elements

Neizostavni činioci svakog limenog krova ili fasade

Cladding elements are manufactured in our workshop, according to standardized drawings and dimensions, or according to your request and drawing, shaped and dimensioned to fit the specific building. The maximum length of cladding elements is 8000 mm.

Ridge cap

Ridge cap is used in pitched roofs, at the junction of trapezoidal sheets that form the roof covering. Its purpose is to integrate with the metal roof and prevent the penetration of rain, wind, and snow into the roof substructure.

	A (mm)	B (mm)
RŠ250	110	15
RŠ330	150	15
RŠ400	185	15

Ridge cap - rounded

Ridge cap - rounded is used in pitched roofs, at the junction of trapezoidal sheets that form the roof covering. Its purpose is to integrate with the metal roof and prevent the penetration of rain, wind, and snow into the roof substructure.

	A (mm)	B (mm)
RŠ250	110	40
RŠ330	160	40
RŠ400	200	40

Gable

Gable is used at the edge of the roof structure. This cladding element protects the roof structure from strong wind impacts that could cause damage.

	A (mm)	B (mm)
RŠ250	70	130
RŠ330	100	180
RŠ400	125	225

Wall side cladding

Wall side cladding is used at the junction of the edge of the roof structure and the wall of the adjacent building. This cladding element prevents the penetration and runoff of water down the wall of the existing building against which the roof structure is leaning."

	A (mm)	B (mm)
RŠ250	110	110
RŠ330	150	150
RŠ400	185	185

Eave trim

Eaves trim is used at the junction of the roof structure and the facade to prevent water from flowing towards the facade.

	A (mm)	B (mm)
RŠ250	150	90
RŠ330	200	120
RŠ400	240	150

Corner wall side cladding

Corner wall side cladding is used at the junction between two facade trapezoidal sheets, ensuring the integrity of the metal structure and preventing damage due to wind impact.

	A (mm)	B (mm)
RŠ250	40	40
RŠ330	55	55
RŠ400	65	65

Snow stopper

Snow stopper is used to protect gutters, property, and people at the base of the building during the melting of accumulated snow on the roof.

	A (mm)	B (mm)
RŠ330	40	75